Shimpo DT-725 Internal Battery Powered Digital Strobo, 115V AC Charger, +/- 0.02 percent Accuracy, 40.0 - 12500 FPM Range

The Shimpo DT-725 battery-powered digital strobo has a xenon flash tube, internal and external trigger modes and a continuous duty cycle. It is designed for motion analysis, preventive maintenance, printing inspection, harmonics analysis, and speed measurement of repetitive motion. The xenon flash tube has a 10 to 15 microsecond flash duration to provide crisp images in brightly lit areas. Xenon flash tubes have brighter light output and a shorter flash duration than LED lights. Bright light output is required for quality images in brightly lit areas, and shorter flash durations provide sharper images, especially at high rates of speed. The strobo has a 40.0 to 12,500 flashes per minute (FPM) range and an accuracy of + or - 0.02% of reading. Built-in multiply-by-2 and divide-by-2 functionality allows the operator to distinguish true RPM from harmonics. Internal mode phase shift has a 360 degree range in six seconds. Phase shift enables the operator to adjust the focal point of the object to any point in the rotation without moving the trigger point. Synchronous output enables the strobo to drive other strobes for wider coverage. The 5-digit, 8mm tall LED display eases reading in low lighting. An integrated 1/4" - 20 Unified Coarse (UNC) ing thread and continuous duty cycle provide permanent installation and long-term use without the need for cool-down periods. The high-impact plastic housing provides durability. The strobo includes a 115V AC adapter and instructions. Strobos are used in a variety of settings including manufacturing, printing, education, and photography. Specifications -------------- Flash range and accuracy40.0 to 12,500 FPM, with + or - 0.02% of reading accuracyResolution0.1 FPM at 40.0 to 4,999.9 FPM 0.2 FPM at 5,000 to 7,999.9 FPM 0.5 FPM at 8,000 to 9,999.5 FPM 1 FPM at 10,000 to 12,000 FPMRate multiplier/dividerMultiply-by-2 and divide-by-2Phase shiftPush buttons shift 360 degrees in 6 secondsLight source10W xenon flash tube with 100-million flash life spanFlash duration10 to 15 microsecondsExternal trigger input12 to 24V DC using a 3-wire NPN output sensor 12V DC using a 2-wire proximity sensor Switch or relay contactPower requirementsInternal rechargeable battery with 115V AC adapter, 50/60HzBattery life1 to 2 hours, depending on flash rateHousingHigh-impact plasticDimensions8.5 x 4.3 x 9" (H x W x D)Weight2.75lbs./1.25kg H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Strobos evaluate the functionality of fast-moving rotational objects, such as belts, fan blades, and other machine parts. They are used in industries such as manufacturing, entertainment, high-speed printing, wood and metal turning, and in education and research settings. Strobos have a flashing light (strobe) that, when directed at a moving object, makes the object appear to be stopped or moving in slow motion. This enables the operator to evaluate machine performance without stopping the machine. Strobos use either xenon flash tubes or LED light sources. The strobe is triggered either internally, which allows the operator to manually adjust the flash rate, or externally and automatically by a peripheral sensor. Multiply-by-2 (2/4 or 2X) and divide-by-2 (1/2) functionality enables the operator to verify the actual revolutions per minute (RPM) and to distinguish true RPM from harmonics. Phase shift adjusts the flash delay in degrees of a full rotation, and time delay adjusts the flash delay in seconds or fractions of a second. Input and output features enable the operator to use peripheral sensors to trigger flash rates, to perform tachometer operations, or to daisy-chain strobos. Shimpo Instruments manufactures force, torque, and speed evaluation instruments. The company, founded in 1974 and headquartered in Itasca, IL, meets International Organization for Standardization (ISO) standard 9001. What's in the Box? ------------------ * Shimpo DT-725 battery-powered strobo * 115V AC battery charger * Instructions

• Battery-powered digital strobo provides stop motion or slow motion viewing of moving machinery for motion analysis, preventive maintenance, printing inspection, and speed measurement of repetitive motion.
• Internal and external trigger with a flash-rate range of 40.0-12,500 flashes per minute (FPM) and a built-in multiply-by-2 and divide-by-2 functionality.
• 10W xenon flash tube with 10 to 15 microsecond flash duration to provide sharp images in brightly lit areas.
• Continuous duty cycle eliminates the need for cool-down periods.
• 1/4" - 20 Unified Coarse (UNC) threaded for ing on a tripod or other ing surface.