Thermal Grizzly Conductonaut Liquid Metal - (1.0 Gram)

Pro:- Works really good, transfers lot of heat very quickly- Very small quantity is required, very thin layer is needed.- Use with nickle coated copper heat sink (or just copper heat sink)- definitely 10 degree Celsius drop in temperature.Warning.- AVOID USING ON ALUMINIUM HEATSINK, it will react with aluminum and break your heatsink.- if using on direct copper heatsink, it will react and form a thin layer of alloy, so reapply it after few days.- its relatively difficult to apply and remove, can get messy.- its electrically conductive, need to be very careful not to spill or overuse.- make sure to clean the fan and vents and the heatsink before applying, for best resultsCon:- none (only If you applied it correctly)My Experience:- Got almost 20 degree Celsius drop in CPU/GPU temperature, after thoroughly cleaning the fans, vents and heatsink with IPA, and also used new 12W thermal pad for GPU VRAM and power modules.

Good product. Working as expected for heat dissipation.

It does reduce the tempratures by almost 10 to 15 degrees in some cases. Its a bit tricky to apply but once done correctly you will surely get good results. Be cautious with application as it can easily short circuit if spilled over motherboard components.

Before using it, my CPU temps hovered around low to mid 90s but after this, it never goes above 85 °C even in the heaviest of the games and for prolonged gaming either. It stays around high 70s to low 80s.A direct 10-12 °C drop!Strongly recommended. Worth the price.

Packing better

Very good performence but too difficult to apply for me

This thing is the perfect solution for all the overheating caused due to all the heavy gaming.My laptop CPU temps were going as high as 95-98 and gpu temps were also skyrocketing but after removing my old dried out thermal paste and applying liquid metal on my cpu and gpu the temps lowered to around 70-80(on load) and 50-60(on idle).Before applying LM, you should watch tutorials from youtube as LM is electrically conductive and can damage your motherboard. In my case, I first used clear nail polish around cpu and gpu so that it can create a safety layer and then used electric tape around the processors to cover the sensitive parts.You should definetly go for LM as it will give you the best results

Bought to lower my razer blade temps with this liquid metal ,but receved spilled /damaged also have formed crystals within it ,and now its burning like hell ...