Metra95-5812 Double DIN Installation Kit Fits SELECT 2004-2019 Ford Vehicles -Black.

This is required to install a new double DIN radio/AV center in a Ford E450 Super Duty Class C Motorhome. It is a perfect fit.

The item matches the description perfectly. It is built to be heavy-duty, ensuring durability and strength, making it ideal for demanding tasks. Additionally, the price is quite reasonable considering the quality and performance it offers. I wholeheartedly recommend this product to anyone in search of a reliable and sturdy option.

Perfect fit made it look good

Just finished installing this with a Pioneer AVH-P3400BH Double DIN in my 2005 Ford Focus. Ultimately, it worked and it looks good. But, it wasn't brain dead easy; my notes:* The instruction are a little confusing (for my vehicle, the instructions mention not breaking off the back tabs...and says, all other vehicles, move to step 2) Where was my step 2?! My take, the instructions for all vehicles are pretty much identical except some vehicles remove the back tabs, and some need to install the provided spacers).* Because of the curvature of the face plate of the adapter (due to the curvature of the car stereo area in general), it was a little off putting that the faceplate and the radio didn't align perfectly corner to corner when I was setting things up out of the car. This isn't a fault of the adapter, just the reality of putting a perfectly flat headunit into a non-uniformly curved opening ...once it is installed into the car, this difference was much less noticeable.* The fit of the radio + adapter in the car was tight. Much less smooth than getting the factory stereo in and out. I needed to gingerly push the side mounting brackets to get things to finally seat squarely in the dash.* The mounting holes of the adapter didn't perfectly align with the holes in the dash. I could get everything in though.* The 4 mounting screws provided where smaller than the factory screws I took out. For me, they were too small and didn't catch securely. Fortunately, I just reused the factory mounting screws with no problem.If you are not deterred by the finer points of the installation mentioned above, I don't think you should any problems with this vehicle and head-unit.

Made my installation easy, looks great.

This review is strictly for a 2008 Ford Explorer, the product may be perfectly suitable for other vehicles.I've used Metra dash kits for many years now, and have always been pleased with their quality and finish. In this case, I am very disappointed. This kit is for both single and double DIN installations. I am installing a double DIN enonon G2104 head unit. It is clear they tried to make this one product work for a wide array of vehicles. As such there are modifications which are required to make this kit work with your specific vehicle. I'll try to describe each issue.1. The dash kit when properly assembled just doesn't fit properly into the dash opening. There are gaps between my dash trim, and this install kit's face plate. There is absolutely no way to correct or fix this.2. The kit requires you to cut tabs off of the kit for the explorer installation. You'll need to not only cut off the tabs, but sand down the bracket where the cut was made.3. For the explorer install spacers are included and required. The spacers are problematic. They should snap in place, but they are too loose, and tend to fall out as you are attempting to secure the kit to the dash.4. The face plate requires you to recess your radio into the dash. The kit's face place sits on top of your head units face plate, and pushes your head unit backward into the dash recessing it. Now this doesn't sound bad until you see it installed, it looks like a hack rather than a clean installation. If you have a deep head unit, you may even have issues getting it to fit in.5. Because the face plate covers over the head units face plate, units with controls near the edge will be blocked by this kit's face plate. On my unit, the USB port, SD card slot, infrared window, and a few other items we inaccessible with this kit. Also if you have knobs, the kit may not fit at all. The knobs on my unit are close to the edge, and since the kit needs to cover a bit of the units face plate, the knobs wouldn't even fit through the opening in the kit. If you have a motorized front face, there is no way this kit will work. Rather than covering the head unit's front face, they should have made the kit to allow the head unit's bezel to pop through the kits face plate.6. Be wary of using the included screws, they are very long, and may interfere with the functioning of your head unit. You would be better off getting shorter screws.Overall I am seriously disappointed with this kit and would not recommend it for a 4th gen explorer installation.

It's a good radio bezel but it didn't fit my car properly even though it's under the listed cars it fits. My radio has a small gap in between it and the frame leading to the inner of the car. And if I press to hard on it I can feel the radio move. Not the best but not the worst.

This for my 2018 Ford E-450 RV dash perfectly. The tabs on the back have to be cut off for this fit but this is in the instructions. The slide in frame that comes with the stereo you are installing does not get used with this. You will screw the metra sides to the stereo and that provides the proper support.